So I know for a fact that dhcp is working through the base ap with no problems. I tried connecting a laptop to the base ap via wifi, and I see this in the network manager logs: I upgraded to this latest version and disabled SFE (as described in the wiki) but still having issues with dhcp making it through the dd-wrt device. I just flashed the version straight from the wiki: Thank you everyone! It's a v1, with the brick style power adapter. Last edited by egc on Tue 7:16 edited 1 time in total Note I do not touch Operating Mode, I just leave it in its default Gateway mode Dd wrt v24 sp2 problem how to#See the forum guidelines with helpful pointers about how to research your router, where and what firmware to download, where and how to post and many other helpful tips:Īttached my notes how I do it (not saying it is the only or the best way) If you aren't on the current release (49418), you should be.įor now assuming it is a v1 or v2 so Broadcom and I will transfer this thread to the appropriate forum I still have to flash up to current releases with the Station / Station Bridge mode name changes, etc. That may also be something relevant to the whole "Filter Multicast" setting anomalies in more current releases as kerryhall: Which version of the WNDR4500 do you have? V1/V2 are Broadcom, V3 is Atheros. Not sure if that notion had to do with the fullswitch function that was removed (Assign WAN port to switch) or what, to be quite honest. Given your expertise and the weight of your words, eibgrad, I will walk through these modes that reference that change in operating mode and verify no ill effects and make the necessary edits. I don't know why the dd-wrt wikis insist on telling users to mess w/ the Operating Mode.ĭdwrt-ovpn-split-basic.sh (UPDATED!) * ddwrt-ovpn-split-advanced.sh (UPDATED!) * ddwrt-ovpn-client-killswitch.sh * ddwrt-ovpn-client-watchdog.sh * ddwrt-ovpn-remote-access.sh * ddwrt-ovpn-client-backup.sh * ddwrt-mount-usb-drives.sh * ddwrt-blacklist-domains.sh * ddwrt-wol-port-forward.sh * ddwrt-dns-monitor.sh (NEW!) But in any bridged configuration, there is no WAN, so how the Operating Mode is set is utterly irrelevant! Gateway mode enables NAT over the WAN, while Router mode disabled NAT over the WAN. Should be in router mode, and the IP address for the gateway is on the Setup -> Basic Setup page. I do not see a place to set the "Gateway Mode", beside I suppose "Operating Mode" (which is currently set to "router").īut even if I set "Operating Mode" to "Gateway", I do not see a place to enter the primary router's IP address.Īs of right now, my dd-wrt device is able to connect to the base AP with no problems, and I can access the dd-wrt web interface and ssh server from the base side with no issues, but it looks like dhcp isn't propagating from my router to the lan ports on the dd-wrt device. Dd wrt v24 sp2 problem manual#"Set Gateway mode to manual and enter primary router's IP address." (and for now I can admin from the primary router side) It would be nice to get to that point eventually, but for now I would be content with getting just client bridge working. So how do I tell dd-wrt "I want to use this device as a repeater bridge, but I don't want you to rebroadcast the SSID of the base station, instead, broadcast this new SSID" (that will basically only be used for admin access or various tests) I don't want that.basically what I'm trying to achieve is a 4 port switch that is wirelessly connected to a base AP, *and* provides an SSID that is *only* used for configuring dd-wrt, no other network traffic should pass through the radio, I don't want random network devices to connect to it that would have connected directly to the base. "Wireless Network Name SSID: Must Match Primary Router EXACTLY including case" "On R/RB, the base SSID will not only be used for joining the main-router, but also be repeated by the repeater"īut I don't want the base SSID to be repeated by the repeater. Which is good, this is what I want, different SSIDs for the base and the repeater bridge. "On both WDS and R/RB (both R and RB), the repeater and base can broadcast different SSIDs." Pogo - A minimal level of ability is expected and needed.Īt some point, people just get plain tired of this place.īecause they are tired of bottom-feeders and the same old hat. "Life is but a fleeting moment, a vapor that vanishes quickly All is vanity" Some hardware platforms do not support Repeater modes natively. It would help to know exactly what router.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |